Skip to main content

Materials

Here you will find downloadable copies of the data sheets for our standard, stock and most popular materials. There are a wide range of SLA, Figure 4, SLS and Vacuum Casting materials available so if you have a specific requirement, or material in mind, then please contact us.

SLA - Data Sheets

DSM Somos Watershed XC11122

Features:
  • Optically Clear
  • Can be polished/lacquered to improve transparency
  • An excellent substrate for finishing
  • Outstanding water resistance
Applications:
  • Consumer Products
  • Fluid Flow Analysis
  • Duct work
  • Lenses

DSM Somos EvoLVe 128

Features:
  • White
  • High Strength & Durability
  • Accurate and dimensionally stable
  • A good substrate to finish
Applications:
  • Snap Fit Clip Designs
  • Tough, Functional Prototypes
  • Jigs & Fixtures

Figure 4* - Data Sheets

*For non-stock resins such as Flex-BLK 10, Hi-TEMP 300-AMB, MED-WHT 10, EGGSHELL-AMB 10, please contact Drumlord for data sheets.

PRO-BLK-10

Features:
  • Versatile, rigid material ideal for prototype or production parts
  • Excellent surface quality
  • Tough & durable with 70⁰C HDT & 12% elongation at break
  • Biocompatible capable per ISO 10993-5 & ISO 10993-10
Applications:
  • Connectors
  • Snap-fits
  • Housings
  • Automotive interior & general use

ELAST-BLK-10

Features:
  • Realistic rubber look & feel
  • 65A Shore hardness
  • High elongation at break
  • Excellent compressive characteristics & shape recovery
Applications:
  • Hoses & Tubes
  • Seals & Gaskets
  • Grommets
  • Spacer & Damping components
  • Weatherstripping

MED-AMB-10

Features:
  • Biocompatible capable per ISO10993-5 and ISO10993-10
  • Sterilizable by autoclave
  • Thermal resistance over 100 °C
  • Excellent humidity/moisture resistance
  • Rigid and translucent
Applications:
  • General medical applications
  • High temperature testing
  • Fluid handling manifolds and flow analysis

SLS - Data Sheets

EOS PA 2200 Nylon 12

Features:
  • White
  • Strong & Rigid
  • High temperature resistance
  • Good Chemical Resistance
  • Bio compatible according to EN ISO 10993-1 and USP/level VI/121 °C
Applications:
  • Production and Prototype parts.
  • Jigs and fixtures
  • Duct work

EOS PA 3200 GF Glass Filled Nylon 12

Features:
  • Off-White
  • High Rigidity & Good Elongation
  • Resistant to Wear & Tear
Applications:
  • Automotive Engines
  • Advanced Engineering Thermoplastics

EOS PA 2241 FR Flame Retardant Nylon 12

Features:
  • White
  • Good Tensile Strength
Applications:
  • Aviation (behind panel applications)
  • Air Ducts & Exhaust Valves

Vacuum Casting - Data Sheets

The information below reflects a selection of the wide range of PU resins available. If you have a specific requirement, or do not see a suitable resin, please contact us.

General (PX225)

Features:
  • Good Impact
  • Cost-effective
  • Pigmentable
Applications:
  • General Prototyping
  • PC & ABS parts

ABS (SG95)

Features:
  • Good all-round properties
  • Pigmentable
  • Strong
  • Optical Properties
Applications:
  • Large, thin-walled parts
  • Snap Fits
  • Colour Matching
  • Production & pre-production

Clear (VC 3351)

Features:
  • Optically clear, UV stable material
  • Can be tinted
  • Strong
Applications:
  • Lenses & screens
  • Production parts
  • Fluid dynamics
  • Light pipes

Flexible (30A to 95A Shore)

Features:
  • Tough, Durable Elastomers in a range of Shore A Hardnesses
  • Pigmentable
  • High Tear & excellent Abrasion Resistance
Applications:
  • Gaskets & Seals
  • Keypads
  • Over-moulding
  • General rubber/silicone applications

Flame Retardant (VC3385)

Features:
  • Flame retardant (UL94 V-0)
  • Pigmentable
  • Excellent physical properties
Applications:
  • Low volume production
  • Pre-production trials
  • All applications where a UL94 V-0 rating is required.

Semi-Rigid/PP/PE (8045)

Features:
  • Variable hardness (48D-74D Shore)
  • Pigmentable
  • Flexible
Applications:
  • High impact
  • Snap fits

Glass Filled (PX245)

Features:
  • Similar to POM & Filled Thermoplastics
  • Pigmentable
Applications:
  • Replication of filled thermoplastics

POM/Automotive (PX223 HT)

Features:
  • High Temperature (~120⁰C)
  • Black
  • Good Impact & Flexural Resistance
Applications:
  • Automotive
  • Snap Fits
  • ABS-like
  • Good Chemical Resistance

High Temperature (PX234 HT)

Features:
  • Very High Temperature (~190⁰C)
  • Limited Colouring Options
  • Good Impact Resistance
Applications:
  • High Thermal Resistance
  • Mimics PA6.6, PEEK, PPS